Canon 24-70 f/2.8 L II Rubber Grip Replacement
Sticky, loose or torn rubber rings on a Canon EF 24-70mm f/2.8 L II make a great lens feel worn out. We fit a complete new rubber kit for a fixed €70.
Symptom checklist
- Zoom or focus rubber ring loose, slipping or rotating
- Rubber gone sticky, swollen or shiny with use
- Torn or cracked grip rubbers
- Lens looks worn and loses resale value
If you are looking into Canon 24-70 rubber ring replacement, chances are the zoom or focus rubbers on your EF 24-70mm f/2.8 L II have gone loose, sticky or torn. It is purely cosmetic-mechanical wear, and it is cheap to put right: we fit a complete new rubber kit for a fixed €70.
The symptoms
The grip rubbers on a heavily used 24-70 age in predictable ways: the zoom ring rubber stretches and starts slipping or rotating around the barrel, the surface turns shiny or sticky, and edges crack or tear. A customer contacted us for exactly this reason — the external rubbers on her lens were worn out, and she asked whether we could replace them with a new kit.
Nothing was wrong with the optics or the mechanics; the lens simply looked and handled far worse than it deserved. That is the usual picture with this job — the glass of an L-series zoom outlives its rubbers by many years.
What causes it
Rubber compounds age. Hands, sweat, heat and time make the rings swell and lose their tension, which is why an older rubber slips loosely around the zoom ring. Underneath, the double-sided adhesive backing that holds some of the rubbers in place degrades as well — old adhesive residue is the reason a new rubber will not sit properly if it is just stretched over the top of a dirty mounting surface.
Can you fix it yourself?
Fitting generic replacement rubbers at home is possible in theory, but the results are usually disappointing: if the old adhesive is not removed completely and the surface cleaned with the right solvent, the new rubber lifts and starts rotating within weeks. Cheap non-original rings also rarely match the diameter and texture of the originals. Given the modest cost of a professional job with the complete kit, DIY saves very little.
How we repair it
The customer sent us the lens and our technicians examined it carefully before starting the replacement of the complete rubber kit. The old double-sided adhesive backing was stripped off and the mounting surfaces cleaned with a solvent, so that the new adhesive would bond properly. The new kit was then fitted in place of the worn rubbers.
With the full set replaced, the lens looked like new again. As with every job in our Canon repair department, we checked the lens over before returning it — the function check is included.
Price and turnaround
| Service | Price |
|---|---|
| Complete rubber kit replacement, Canon 24-70 f/2.8 L II | €70 (fixed) |
| Internal cleaning | Included |
| Final test & calibration | Included |
The turnaround shown above is typical for this repair; your exact timing is confirmed in the free written quote and can vary with parts availability. Return shipping is a flat €20 by UPS to most EU destinations. Return shipping is a flat €20 most of the EU, and the price is fixed — you know the full cost before the lens leaves your hands.
Ship your lens from most of the EU — diagnosis is free and the work is covered by a 6-month warranty. See how it works.
Frequently asked questions
Can the rubber rings on a Canon 24-70 be replaced?
Yes — the zoom and focus grip rubbers are replaceable parts. We fit a complete new kit rather than a single ring, so the whole lens looks and feels consistent.
How much does Canon 24-70 rubber ring replacement cost?
A complete rubber kit, fitted, costs a fixed €70 with a function check included.
Why do lens rubbers get sticky or loose?
The rubber compound ages with use, sweat and heat — it swells, loosens and can turn sticky. The adhesive backing underneath also degrades, which is why a proper replacement includes cleaning off the old adhesive.
Is it worth replacing the rubbers on an L-series lens?
For €70, usually yes — fresh grips restore the handling and appearance of the lens and make a visible difference if you ever sell it.
Is this your fault? Ask about this repair
Tell us what is happening and we will reply with a first assessment and explain the next step. The binding quote is issued after inspection. Diagnosis is free and you are not committing to anything — no shipping details needed yet.
More Canon repairs
Err 20 Canon 6D Mark II Error 20: What It Means & Fix
Error 20 on the Canon 6D Mark II signals a mechanical malfunction that blocked the shot. It is not always a worn-out shutter — in this case, a broken drive motor was replaced for a fixed €150.
€150 fixed price
Err 01 Canon 17-55 f/2.8 Err 01: Stuck Aperture Repair
Aperture stuck wide open and a ticking noise inside your Canon EF-S 17-55mm f/2.8? The aperture unit has failed. We replace it for a fixed €150.
€150 fixed price
Canon 28-70 f/2.8 L Hazy Lens Repair & Re-Cementing
The Canon EF 28-70mm f/2.8 L USM is famous for developing internal haze as its original optical cement degrades. We separate, clean and re-cement the affected doublet at a fixed price.
€180 fixed price
